Vega VEGAFLEX series 60 Recurring function test Instrukcja Użytkownika

Supplementary informationRecurring functiontestfor VEGAFLEX series 60Document ID:36552

3.3 Verification of the instrument parametersFor this test point, the sensor documentation of the setup or the lastsensor documentation (at least 6 mon

3.4 Verification of echo dataFor this test point, you require the sensor documentation of the setupor a sensor documentation created at least 6 months

ExampleDuring setup, the level echo had 32 dB. The distance [m] to themedium was 12.5 m.The actual level echo has 25 dB. The distance [m] to the mediu

Ifall function tests we re successful, the recurring function test isfinished.If you used an mA-meter for the recurring function test, switch off thesen

4 Result of the recurring function te stIf all test points could be terminated successfully, then the recurringfunction test was successful.Fulfilled t

5 Testprotocol - Recurring function testIf you copy this protocol, please note the date of the function test, themeasurement loop and the sensor seria

Test 3.3 - Verification of the instrument parameters□ Sensor documentation of thesetup availableor□ Sensor documentation (at least 6months old) is avai

● Summary 88 % (λdu)Test 3.1 / 3.2 / 3.5 □ All three test points passed □ One or several test points did notpassDate _________________________________

18 Recurringfunction test • for VEGAFLEX series 605 Test protocol - Recurring function test36552-EN-100225

Recurringfunction test • for VEGAFLEX series 60 195 Test protocol - Recurring function test36552-EN-100225

Contents1 About this document2 Prerequisites2.1 Authorised personnel . . . . . . . . . . . . . . . . . . . . . . . .52.2 Required tools . . . . . . .

VEGA Grieshaber KGAm Hohenstein 11377761 SchiltachGermanyPhone +49 7836 50-0Fax +49 7836 50-201E-mail: [email protected] date:ISO 9

1 About this documentThe recurring function test serves to check the safety function andreveal possible undetected, dangerous failures (λdu). The func

Please note the Ex-specific safety information for installation andoperation in Ex areas. These safety instructions are part of the scopeof delivery an

2 Prerequisites2.1 Authorised personnelAll operations described in this operating instructions manual must becarried out only by trained specialist pe

Information:Document the recurring function test, for example, in the test protocolin the supplement.The following conditions must be fulfilled when pe

3 Sequence of the recurring function testCarry out the recurring function test in the following sequence:l 3.1 Restart the sensorl 3.2 Verification of

Ifyou do not have this possibility, connect an mA-meter accordingto the following illustration.You require the mA-meter for the verification of the cur

3.2 Verification of the current outputIn this test point you simulate certain level values via the currentoutput. With this you can test the reaction o