Vega VEGAFLEX 83 Modbus and Levelmaster protocol PFA in Instrukcja Użytkownika Strona 26

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 96
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 25
26
6 Set up with the display and adjustment module
VEGAFLEX 83 • Modbus and Levelmaster protocol
41838-EN-130314
6.3 Adjustment system
1
2
Fig. 18: Display and adjustment elements
1 LC display
2 Adjustment keys
[OK] key:
Move to the menu overview
Conrm selected menu
Edit parameter
Save value
[->] key:
Presentation change measured value
Select list entry
Select editing position
[+] key:
Change value of the parameter
[ESC] key:
interrupt input
Jump to next higher menu
The sensor is adjusted via the four keys of the display and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 10 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not conrmed
with [OK] will not be saved.
After switching on, the VEGAFLEX 83 carries out a short self-test
where the device software is checked.
The output signal transmits a fault signal during the switch-on phase.
The following information is displayed on the display and adjustment
module during the startup procedure:
Instrument type
Device name
Key functions
Adjustment sy
stem
Switch-on phase
Przeglądanie stron 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

Komentarze do niniejszej Instrukcji

Brak uwag